“Bombay”
Starch Paste Kettle Will Be Made Out Of S.S. 304
Rectangular Pipes Of 3 Mm Thk And Will Be An Independent
Resting Type Frame Work Where No Foundation Will
Be Required. The Kettle Will Be A Hemispherical
Type Bowl With Either Steam / Oil / Water Heating
Jacket Will Be Provded. The Kettle Will Be Manufactured
From 2.5 Mm Thk S.S. 304 Sheet And The Jacket Will
Be Of 2.5 Mm Mild Steel (In Case Of Steam Jacket
The Thickness Will Be 4 Mm) . There Will Be Oil
/ Water Heated Fitted At The Back Bottom Side Of
The Kettle. The Kettle Will Be Having A Worm Type
Arrangement For Tilting . A Temperature Controller
And A Temp Indicator Will Be Provided For Temp Control
And Indication. The Kettle Will Be Insulated With
50 Mm Thk Glasswool Insulation And Claded With 16
Swg S.S. 304 Sheet. Kettle Will Be Buffed To 150
Grit Matt Finish Externally And Internally The Kettle
Will Be Buffed To 220 Grit Mirror Finish
Optionals Available
1. Built In Stirrer Arrangement With Lifting
And Lowering Device
2. Steam Fittings With All Connections Factory
Fitted
3. Non Tilting Type With Bottom Discharge Models
Are Also Available.
Capacities Available
From 10 Ltrs To 2000 Ltrs Capacity.
FUNCTIONS:
Basically This Unit Is Used For Preparation Of
Starch Paste. Hemispherical Shape Ensures That
The Heating Of The Starch Paste Is Uniform And
Gets More Surface Area. The Tilting Type Arrangement
Ensures Ease In Unloading The Paste Into Any Container
Or Vessel. The Starch Is Put In The Kettle And
Water Is Added Till Desired Thickness Is Achieved.
The Kettle Is Jacketed And Is Heated Till Till
The Starch Melts And A Thick Paste Is Achieved.
This Paste Can Be Agitated Either Manually Or
With The Help Of A Anchor Type Agitator Which
Will Constantly Stir The Paste So That There Will
No Lumps Formation And Proper Mixing Is Achieved.
Temperature Can Be Set To Desired Temp By Adjusting
The Thermostat Provided And The Temperature Can
Be Seen In The Dial Thermometer Provided.
