GENERAL
SPECIFICATIONS OF “THE BOMBAY ENGINEERING WORKS” PLANETARY MIXER |
 |
| Planetary Mixer
: This equipment is basically a mixing assembly
where the agitation pattern is of the planetary nature
The beater or the agitation assembly rotate around itself
as well as travel in a circle in the bowl thereby achieving
intimate mixing. Because of special design feature of
shifting the mass is uniformly and intimately mixed.
The
planetary mixer unit consists of Bowl SS Cylindrical bowl with torrispherical
dished bottom with inside surface polished to smooth
finish. MS Jacket on cylindrical and torrispherical
area to operated on 3 Kg / cm sq. Steam pressure Complete
with steam inlet and cold water inlet and outlet connections
with standard fitting like pressure gauge, vent cock,
release valve and drain. Bowl also suitable for vacuum
application and fitted with 3 nos. Of castor wheel,
two fixed and one swivel type. Suitable locking lugs
for fixing bowl to the machine. |
Top
Dish : SS top dish for covering the bowl with
SS flange having groove for fixing the sealing gasket.
Necessary connection with serrated nozzle provided for
connecting flexible pipe for vacuum application Light
and sight glasses suitably provided.
Agitator Assembly :
1 / 2 No/s. Of SS open type Beaters.
1 No. SS Scrapper fitted with PTFE strip on both sides.
1 No. centrally located High Shear Emulsifier. ( optional
) |
|
Drive
Mechanism For Beater :
Consist of the following
- Suitable HP 1440/2880 RPM DUAL Sped TEFC Motor to
work on 415 V, 50 c/s 3 Phase AC supply line, mounted
on MS plate.
- Worm reduction gear box coupled to the motor through
belt and pulley arrangement.
- Epicyclic gear box coupled to the motor through
belt and EPICYCLIC gear train arrangement to achieve
planetary motion.
- Suitable HP 1440 RPM TEFC motor to work on 415V
3 phase 50 C/s AC supply line for High Shear Emulsifier.
( optional )
- The above item are assembled on the top plate which
is supported on a Cast iron sliding sleeve with MS
gussets.
|
| Main
Body : MS column with flange mounted on stool
base 2 nos limit switches provided at upper and lower
limits of the column to control traverse of the sleeve.
|
Lifting
Arrangement Of The Drive Assembly (Mechanical) : Consist
of
- Suitable HP, 1440 RPM motor working on 415V 50 c/s
3 Phase AC supply line.
- Worm reduction gear box coupled to the motor through
belt and pulley arrangement.
- MS STOOL for mounting the reduction gear unit.
- Lead screw and guide bar to guide up and down traverse
of the drive assembly.
|
|
Lifting
Arrangement Hydraulic (Optional) :
- Horse shoe base with suitable gun metal bush housing
for 3nos chrome plated guide bars with suitable retaining
plate and supports.
- Hydraulic Power pack assembly complete with MS.
Tank, suitable HP pump with filter connected to suitable
solenoid valve arrangement with control and check
valve for preventing dropage of pressurized fluid.
- Power Pack connected with fixed / flexible high
pressure inter connecting hose to hydraulic cylinder
of suitable lift clamped to the drive head to give
smooth up and down traverse.
- Limit switch for controlling up and down traverse
motion.
- Control Panel.
- Air break DOL dual speed starter with DOL relay
for main motor.
- HRC back up fuses.
- Ammeters for main motor and lift motor.
- Push Button actuator for above operation fitted
on control panel.
- The circuit consist of mcbs, relays and contactors
is series. Ample overload protection is provided by
The MCBs and the relay.
- Wires coming out of the connections are numbered
for easy recognition.
Finish All SS parts polished to smooth pharmaceutical
finish. All MS part painted to smooth finish. |
|
Options
Available Provided :
- Unit with FLP motors and FLP push button station
but non FLP panel to be mounted outside FLP area
- Unit in SS 316
- Unit in SS304 cladding for GMP model
- Jacketed bowl for steam / electrical heating
|
|
|
| << Rapid Mixer Granulator |
|
