|
 |
GENERAL
SPECIFICATIONS OF “THE BOMBAY ENGINEERING WORKS” DOUBLE CONE
BLENDER |
OPERATION :
The Double Cone Blender is an efficient and versatile
machine for mixing dry powder and granules homogeneously.
All the contact parts made out of stainless steel of
required grade by customer. Two third of the volume
of the Cone Blender is filled to ensure proper mixing.
It can be used for Pharmaceutical, Food, Chemical and
Cosmetic products etc.
|
SALIENT
FEATURES :
- The conical shape at both ends enables uniform
mixing and easy discharge.
All contact parts are made out of stainless 304
or 316 quality material, as required by customer.
- Maximum care has been taken to ensure safe operation
of the unit.
- Manual rotating facility with hand wheel for inching.
The same will be provided with ss cover & limit
switch. ( In 200 Kgs. & above model )
- Two nos. of safety road will be provided at back
side. ( One LH side & one RH side )
- Suitable size of butter fly valve at one end of
the cone provided for material discharge & hole
with openable cover provided at other end of the
cone for material charging & cleaning.
- One shaft with 04 nos. of fixed buffels with mirror
polished provided inside the cone.
- Cone will be mirror polished from the inside &
outside & structure will be matt polished.
- All moving parts covered with SS304 covers.
- Safety guards made from SS304 pipes provided in
front of the m/c with limit switch.
- Panel fabricated from SS304 material with facility
of three phase indication, D.O.L. tarter, digital
timer & Amp. Meter.
- As per customer requirement machine will be provided
with left side drive or with right side drive.
- The conical shape at both ends enables uniform
mixing and easy discharge.
- All contact parts are made out of SS304/316(as
per customer requirement) quality material.
- Maximum care has been taken to ensure safe operation
of the unit.
- Worm reduction gear use for speed reduction.
- Food grade rubber gasket will be used on both
end of cone as well as in butterfly valve.
- Inside & outside of the cone will be polished
to the mirror finished.
- General structure made out of SS304 and Polished
to the matt / mirror finish
(as required by you) in GMP Model.
- All safety guards & covers made out of SS304
in GMP Model.
- Hand wheel will be provided for manual tilting
of cone.
- Safety guards provided with limit switch to not
start the machine when safety guards are not in
proper position.
|
| |
