GENERAL
SPECIFICATIONS OF “THE BOMBAY ENGINEERING WORKS” MATERIAL LIFTING
& FLUID BED TIPPER |
 |
OPERATION :
This equipment is most useful to lift the IPC to transfer
the material from IPC to other container or in hopper
of any equipment.
With help of this equipment dust free and very speedy
material transfer is possible. The equipment is equipped
with one jaw having clamping hooks to clamp the IPC.
The hydraulic system is provided to lift the complete
assembly with IPC.
With help of the hooks first clamp the IPC with jaw of
the Lifter. Lift the whole assembly with IPC at a desirable
height. Finally height can be adjust as per requirement
to transfer the material which are in the IPC. Discharge
the material in other container or any other hopper, with
help of butterfly valve which is provided at discharge
of IPC.
|
SALIENT
FEATURES :
GMP point of view equipment provided with S.S. cladding
base, SS guards, SS cover on motor. No exposed painted
surfaces on top of the machine. Hydraulic power pack
is also covered with SS304 cover.( In GMP Model )
Very less material transfer time making the next process
earlier & save time. Dust free system save environment
of working area. The system can be operate by single
operator.
Contact parts SS304 provided as a standard. SS 316 can
be provided as a optional facility.
Intermediate Product Container : IPC
Capacity in Liters : 50 /75 / 110 / 220 Liters
All IPC’s are provided with Dust Tight Cover &
Butter Fly Valve With Food Grade Gasket & Detachable
Trolley With Castor Wheel Mounted Legs
|
|
CYLINDRICAL
CONTAINER :
Capacity in Liters : 50 /75 / 110 / 220 Liters
Cylindrical Containers are provided with Loose Cover
& Detachable Trolley With Castor Wheel Mounted Legs)
|
| FLUID
BED TIPPER / ELEVATOR : |
OPERATION :
This equipment is most useful to transfer the material
from container of FLUID BED DRYER to INTERMEDIATE
PRODUCT CONTAINER. With help of this equipment dust
free and very speedy material transfer from FBD
bowl is possible. The equipment is equipped with
one cone type container which is provided with clamping
hooks to clamp the FBD bowl, rubber gasket for air
tight fitting between FBD bowl and cone type container.
The container is also have a butterfly valve at
bottom to drain the material in required IPC or
any other container. The hydraulic system (power
pack unit with cylinder) is provided to lift the
complete assembly with FBD bowl and tilt the pair
of cone type container and FBD bowl at 180 degree.
With help of the hooks first clamp the FBD bowl
with cone type container. Lift the whole assembly
with FBD bowl at a desirable height. With help of
hydro-mechanical system tilt the whole assembly
at 180 degree. Finally all the material which was
in the FBD bowl is transfer in cone container. Discharge
the material in IPC or any other hopper, with help
of butterfly valve which is provided at discharge
of cone type container. |
|
|
|
SALIENT
FEATURES :
> GMP point of view machine provided with S.S. cladding
base, S.S. belt guards, S.S.cover on motor. No exposed
painted surface on top of the machine. Hydraulic power
pack is also covered with SS304 cover.
> Very less material transfer time making the next
operation earlier & save time and dust free system
save environment of working area. The system can be
operate by single operator.
> Contact parts SS 316.
> Two types of fluid bed tippers available Fixed
type i.e. top & bottom of pillar are grouted in
roof & bottom floor. Mobile type : Where complete
tipper assembly is movable for undertaking lifting operation
at various location within operational area. Here bottom
of Tipper has wide platform and beneath there are castors.
|
| |
